These are low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are indispensable tools for measuring out small amounts of liquid in chemistry labs. These one-piece pipettes are handy for both chemistry experiments and demonstrations.
• Sold in a pack of 100
• Capacity: 3
• Stem graduations: 0.25 ml. Length: 138 mm

Item 1085-34

In Stock

These are low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are indispensable tools for measuring out small amounts of liquid in chemistry labs. These one-piece pipettes are handy for both chemistry experiments and demonstrations.
• Sold in a pack of 100
• Capacity: 5 ml
• Stem graduations: 0.25 ml. Length: 160 mm

Item 1085-56

In Stock

Single Buret Clamp

Item 2062-04

In Stock

Deluxe Lab Tool Kit

Item 8821-00

In Stock

Analog Hot Plate

Item 6200-01

In Stock

This item is must-have for chemistry labs. It is designed to hold separatory funnels in order to facilitate pouring. The holder has two interchangeable rod holders for added convenience.
• Rod size: 13.39 mm
• Comes with two interchangeable different rod size holders: 12.18 mm and 9.52 mm
• Inner diameter 2.83″
• Dimensions: 6″ L x 3.8″ Dia.

Item 2126-00

In Stock

Disposable Spot Plate, pk/15

Item 1123-00

In Stock

Heat Mantle

Item 5541-00

In Stock

Utility Clamp

Item 2062-06

In Stock

Cork borers are often used in a chemistry or biology laboratory to cut a hole in a cork or rubber stopper to insert glass tubing. They are made of plated sharpened brass tubing, with attached handles. The set also includes a steel punch.

The set includes 11 cork borers, to make the following hole sizes:

1 – Hole Dia.: 5 mm (0.19″)
2 – Hole Dia.: 6 mm (0.25″)
3 – Hole Dia.: 8 mm (0.31″)
4 – Hole Dia.: 9 mm (0.34″)
5 – Hole Dia.: 10 mm (0.39″)
6 – Hole Dia.: 11 mm (0.44″)
7 – Hole Dia.: 13 mm (0.5″)
8 – Hole Dia.: 15 mm (0.61″)
9 – Hole Dia.: 16 mm (0.63″)
10 – Hole Dia.: 17 mm (0.69″)
11 – Hole Dia.: 19 mm (0.75″)

• Sold in a set of 11
• 

Item 2093-04

In Stock

This high-quality neutral Filter Paper is suitable for normal filtration. It contains a very low ash content.
• Qualitative Grade #1, medium speed
• Sold in a box of 100
• 5″ (125 mm) Dia.

Item 4741-03

In Stock

These are low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are indispensable tools for measuring out small amounts of liquid in chemistry labs. These one-piece pipettes are handy for both chemistry experiments and demonstrations.
• Sold in a pack of 500
• Capacity: 5 ml
• Stem graduations: 1 ml. Length: 121 mm

Item 1085-55

In Stock

Cork Borers Set/3

Item 2093-01

In Stock

Cork Borers Set/6

Item 2093-02

In Stock

The steel clips are used for connecting wires with a crimp connection.
• 37 mm L
• Sold in a pack of 10

Item 9123-01

In Stock

These are Replacement Wicks for alcohol burners, such as Items #2066-01 and #2066-11.
• Sold in a pack of 12

Item 2066-12

In Stock

The Watch Glass is a simple tool with many uses. This circular Watch Glass is made of heavy wall plate glass with fired edges. It is used in chemistry as a surface to evaporate a liquid, to hold solids while being weighed, as a cover for a beaker, or for heating a small amount of substance.
• Sold in a pack of 12
• 3″ (75 mm) Dia.

Item 2086-03

In Stock

The Watch Glass is a simple tool with many uses. This circular Watch Glass is made of heavy wall plate glass with fired edges. It is used in chemistry as a surface to evaporate a liquid, to hold solids while being weighed, as a cover for a beaker, or for heating a small amount of substance.
• Sold in a pack of 12
• 4″ (100 mm) Dia.

Item 2086-05

In Stock

Use these tongs for handling or manipulating hot crucibles and similar apparatuses.
• Corrugated tips for easy handling
• Riveted joint
• Finger openings are large enough for firm grip
• Made of stainless steel
• Size: 18″ (450 mm)

Item 2020-33

In Stock

This high-grade, medium-wall rubber tubing is ideal for general laboratory use. It can be used to connect a Bunsen burner to a gas source, and is a versatile staple for classrooms and labs.
• Melting point 230°F (110°C)
• Available in rolls of 50 ft (15 m)
• Approx. 0.19″ inner Dia., 0.06″ wall thickness

Item 6388-51

In Stock

This high-grade, medium-wall rubber tubing is ideal for general laboratory use. It can be used to connect a Bunsen burner to a gas source, and is a versatile staple for classrooms and labs.
• Melting point 230°F (110°C)
• Available in rolls of 50 ft (15 m)
• Approx. 0.25″ inner Dia., 0.06″ wall thickness

Item 6388-52

In Stock

This portable burner does not have wicks to replace or gas lines to install! A stable, tip-resistant design with an easy-grip handle provides safe use and portability anywhere in the lab or work area. The Portable Micro Burner works anywhere! Just open the butane valve and push the ignition button for an adjustable, clean-burning flame. The Micro Burner is refillable from a standard butane cartridge.
• For use with the Micro Burner Stand: Item #2068-01
• 1-2 hours use per fill
• CE Certified
• 40 g fuel capacity
• 5″ (125 mm) L x 3.5″ (90 mm) H x 3″ (914 mm) D
• Weight: 388 g
• Fuel Capacity: 41 g
• Maximum flame temp.: 900℃
• Can burn up to 60 minutes per gas filling

Item 2068-00

In Stock

This high-grade, medium-wall rubber tubing is ideal for general laboratory use. It can be used to connect a Bunsen burner to a gas source, and is a versatile staple for classrooms and labs.
• Melting point 230°F (110°C)
• Available in rolls of 50 ft (15 m)
• Approx. 0.31″ inner Dia., 0.06″ wall thickness

Item 6388-53

In Stock

This high-grade, medium-wall rubber tubing is ideal for general laboratory use. It can be used to connect a Bunsen burner to a gas source, and is a versatile staple for classrooms and labs.
• Melting point 230°F (110°C)
• Available in rolls of 50 ft (15 m)
• Approx. 0.38″ inner Dia., 0.06″ wall thickness

Item 6388-54

In Stock

This versatile and flexible clamp securely attaches to support stands, lab frames, and most support rods. The unique, flexible arm can be placed in virtually any position or angle. It is a convenient and useful tool for chemistry labs.
Features:
• 3-prong clamp head
• Nickel-plated flex arm
• Cast-alloy lab frame connector

Item 2062-03

In Stock

This steel, triangular file is a helpful accessory for deburring, cutting glass tubing, and other laboratory uses.
• 4″ (100 mm) L

Item 2088-04

In Stock

This steel, triangular file is a helpful accessory for deburring, cutting glass tubing, and other laboratory uses.
• 6″ (150 mm) L

Item 2088-06

In Stock

This premium lab coat is pre-shrunk, 100% heavyweight cotton till made with extra durability in mind, hand-dyed rainbow tie-dye. The coat can be used in the lab, at school, or at home – it’s even great as an art smock! It is knee-length with full sleeves, 2 roomy lower pockets, and side slit openings for easy access to pants pockets.
• Unisex
• Size: XXX-Large (see size chart for more details)
• Length:43.5 in
• Chest: 53 in
• Shoulder: 22 in
• Sleeve Length: 26.5 in
• Sleeve Width: 13.5 in

Item 8833-50

In Stock

This product is an electric, glass-top hot plate. Users can increase or decrease the heat by 6°F with each button click up or down. After turning off the unit, the screen displays “HOT” until it has cooled sufficiently.
• Comes with a Teacher’s Guide
• On/off switch
• Child lock
• +/- controls
• Max 660°F (350°C)
• Min 140°F (60°C)
• 8″ L x 10″ W x 3″ H
• 5″ D heating element
• 36″ long cord
• 110 V

Item 6200-00

In Stock

This wooden handle is for use with our Laboratory Scoop, Item #2084-01.

Item 2084-01H

In Stock

This silicone Rubber Grip will allow you to safely hold hot beakers in your hand. The grip makes moving hot liquids easy and safe. It is a necessity for keeping the user safe during chemical experiments and demonstrations.
• Temperature max: 250°F (120°C)
• One size fits all

Item 2208-01

In Stock

This Magnetic Stirrer is widely used for stirring a variety of liquids in laboratories and research institutes. Each stirrer is quality checked and backed by a 1-year warranty.

Item SH-1

In Stock

This product is widely used for the simultaneous stirring and heating of liquids. Its totally enclosed, 5″ (125 mm) x 5″ (125 mm), cast aluminum heating surface resists chemical spills. Stirring speed and temperature are regulated from the front panel with separate dials. Indicator lights inform users at a glance if either control is active.
Includes:
• Detachable 12″ (300 mm) support bar with a clamp for thermometer or pH probe
• Detachable power cord measuring 5.5 ft long
• Instructions
• Stirring capacity is up to 500 ml with a strong vortex
• 110 V-250 V
• 180 W
• Temperature max: 480°F (250°C)
• RPM 120-1600
• Each one is quality checked and backed by a 1-year warranty

Item SH-2

In Stock

This product is widely used for the simultaneous stirring and heating of liquids. Its totally enclosed, 7″ (175 mm) x 7″ (175 mm), cast aluminum heating surface resists chemical spills. Stirring speed and temperature are regulated from the front panel with separate dials. Indicator lights inform users at a glance if either control is active.
Includes:
• Detachable support bar with a clamp for thermometer or pH probe
• Detachable power cord
• Instructions
• Temperature max: 480°F (250°C)
• RPM 120-1600
• Each one is quality checked and backed by a 1-year warranty

Item SH-3

In Stock

Designed for laboratory use, this is a variable heat control ceramic top heater. Heat is generated from resistant coils recessed into the ceramic top. This product also comes with a removable ceramic top plate specially designed for round bottom flasks.
• Effective temperatures are from ambient to 600°F
• 500 Watts
• The open area in the removable ceramic top plate measures 3.75″ (95 mm) Dia.
• 6″ (150 mm) L x 6″ (150 mm) W

Item SM-5

In Stock

This clamp is made of chrome-plated brass. Use it to control flow in flexible tubing.
• 1″ opening

Item 9121-12

In Stock

With a delivery tube on its side, this product becomes a one-piece wash bottle. Made of translucent polyethylene, this product is easy to use and durable.

Item 7001-00

In Stock

This premium lab coat is pre-shrunk, 100% heavyweight cotton till made with extra durability in mind, hand-dyed rainbow tie-dye. The coat can be used in the lab, at school, or at home – it’s even great as an art smock! It is knee-length with full sleeves, 2 roomy lower pockets, and side slit openings for easy access to pants pockets.
• Unisex
• Length: 34.5”
• Chest: 36”
• Size: small (see size chart for more details)

Item 8833-00

In Stock

This premium lab coat is pre-shrunk, 100% heavyweight cotton till made with extra durability in mind, hand-dyed rainbow tie-dye. The coat can be used in the lab, at school, or at home – it’s even great as an art smock! It is knee-length with full sleeves, 2 roomy lower pockets, and side slit openings for easy access to pants pockets.
• Unisex
• Length: 38”
• Chest: 40”
• Size: medium (see size chart for more details)

Item 8833-10

In Stock

This premium lab coat is pre-shrunk, 100% heavyweight cotton till made with extra durability in mind, hand-dyed rainbow tie-dye. The coat can be used in the lab, at school, or at home – it’s even great as an art smock! It is knee-length with full sleeves, 2 roomy lower pockets, and side slit openings for easy access to pants pockets.
• Unisex
• Length: 38”
• Chest: 44”
• Size: Large (see size chart for more details)

Item 8833-20

In Stock

This premium lab coat is pre-shrunk, 100% heavyweight cotton till made with extra durability in mind, hand-dyed rainbow tie-dye. The coat can be used in the lab, at school, or at home – it’s even great as an art smock! It is knee-length with full sleeves, 2 roomy lower pockets, and side slit openings for easy access to pants pockets.
• Unisex
• Size: X-Large (see size chart for more details)
• Length: 42 in
• Chest: 50 in
• Shoulder: 20.5 in
• Sleeve Length: 25 in
• Sleeve Width: 12 in

Item 8833-30

In Stock

This premium lab coat is pre-shrunk, 100% heavyweight cotton till for extra durability, hand-dyed rainbow tie-dye! Can be used in the lab, at school, or at home – great as an art smock! The coat is knee-length with full sleeves, 2 roomy lower pockets, and side slit openings for easy access to pants pockets.
• Unisex
• Size: XX-Large (see size chart for more details)
• Length:43 in
• Chest: 52 in
• Shoulder: 21.5 in
• Sleeve Length: 26 in
• Sleeve Width: 13 in

Item 8833-40

In Stock

DISH TONGS, HOLD 75MM TO 125MM; LENGTH 25CM

Item 6455-22

In Stock

Rubber Tubing 3/16″, 10 Feet

Item 6388-01

In Stock

Rubber Tubing 1/4″, 10 Feet

Item 6388-02

In Stock

This high-grade, medium-wall rubber tubing is ideal for general laboratory use. It can be used to connect a Bunsen burner to a gas source, and is a versatile staple for classrooms and labs.
• Melting point 230°F (110°C)
• Available in rolls of 10 feet (3 m)
• Approx. 0.31″ inner Dia., 0.06″ wall thickness

Item 6388-03

In Stock

This high-grade, medium-wall rubber tubing is ideal for general laboratory use. It can be used to connect a Bunsen burner to a gas source, and is a versatile staple for classrooms and labs.
• Melting point 230°F (110°C)
• Available in rolls of 10 ft (3 m)
• Approx. 0.38″ inner Dia., 0.06″ wall thickness

Item 6388-04

In Stock

TUBES GAS MEASURING, 50 ML

Item 5593-05

In Stock

TUBES GAS MEASURING, 100ML

Item 5593-10

In Stock

Funnel, Short Stem, 45mm

Item 5611-03

In Stock

MEASURING CYLINDERS, METRIC SCALE CAPACITY 10ML

Item 5565-03

In Stock

Use these cylinders in general laboratory procedures. They have round bases, spouts, and break-resistant collars.
• Capacity: 25 ml
• Subdivision: 0.5 ml
• Tolerance: +0.5 ml

Item 5565-05

In Stock

MEASURING CYLINDERS, METRIC SCALE CAPACITY 50ML

Item 5565-07

In Stock

This lamp is an all-metal, leak-proof alcohol burner. It features a permanent wick. No replacements are needed. The lamp is a useful addition for chemistry classrooms and labs.
• Comes with a Teacher’s Guide
• Sufficient for 1.5 hours use
• Tank capacity 100 ml

Item 5456-00

In Stock

ALCOHOL BURNER, WICKLESS, DUAL HEAD, ALL METAL

Item 5456-11

In Stock

This product is a multiple-use manometer that accurately measures gas pressure.
• Borosilicate
• 50 cm arm
• Funnel top
• 26 cm arm with riffle
• Mounted on wooden board

Item 3542-00

In Stock

Use these clamps for clamping 2 apparatuses together or securing an apparatus to a table top. They are also useful for setting up rod mounted pulleys. The clamps are useful for physics labs and classrooms.
• Cast-iron enameled frame
• Plated screw and vise type nut
• Jaw opening 4″ (100 mm)

Item 3554-03

In Stock

Use this collar for suspending spring balances, cords, pendulums and other apparatus from support rods or cross members. It is fitted with thumbscrews.
• Hook inner Dia. 0.5″ (13 mm)

Item 3458-01

In Stock

This apparatus makes it easy and simple to measure the melting point (250°C limit). The apparatus consists of an aluminum testing block with a slanted thermometer hole. Sprinkle material on the top of the block, insert the thermometer into the slanted 7mm hole, and heat the block from below using a Bunsen burner or other heat source to test. As soon as the material starts to melt, read the thermometer for the melting point. Support stand, support ring, Bunsen burner, and thermometer are required but not included. 50mm L x 63mm W

Item 3265-00

In Stock

Use this clamp for tubes from 6 mm to 31 mm in outer Dia. It is made of plated spring steel wire. The clamp is useful in chemistry labs and for classes.
• Approx. 7″ (180 mm) L

Item 2030-02

In Stock

Use this clamp for tubes from 10 mm to 19 mm outer Dia. It is made with a steel spring. With thumb pressure, the jaws of the clamp will open.
• Smooth finish
• Approx. 7″ (180 mm) L

Item 2031-01

In Stock

This product consists of a flat, circular cast-iron plate with a plated thumbscrew.
• Rim inside Dia.: 127 mm
• Can be clamped to rods up to 16 mm Dia.

Item 2040-00

In Stock

CLAMP EXTENSION, FOUR PRONG

Item 2062-01

In Stock

Use this item for ensuring a firm grip on small round or irregularly shaped objects. This 3-pronged aluminum die-cast clamp features a brass thumbscrew. Its jaws are covered with replaceable rubber tubing, and open from 0.13″ (3 mm) to 3.5″ (90 mm).
• Approx. 10″ (250 mm) L

Item 2062-02

In Stock

Use this clamp for connecting 2 rods at right angles, forming an L or T shape. It is made of die-cast alloy with plated brass thumbscrews. It can accept or be clamped to rods up to 0.75″ (18 mm) Dia.

Item 2063-01

In Stock

This burner is ideal for student use. It is made of molded soda glass with a tightly fitting, sealed brass cap. Alcohol is poured by removing the threaded brass wick holder. The burner is equipped with a glass cap for extinguishing the flame and preventing evaporation of alcohol.
• Capacity: 125 ml

Item 2066-01

In Stock

This Bunsen Burner is built with a heavy base for stability. It has a brass mixing pipe 0.5″ (13 mm) Dia. and a 0.34″ (9 mm) Dia. serrated gas inlet tube. It is a classic and useful implement for chemistry labs.

Item 2066-02

In Stock

Use this burner for obtaining a very hot flame. It is suitable for glass work and soldering. The burner consists of a plated brass tube 0.5″ (13 mm) outer Dia. x 4″ (13 mm) H, with a threaded disc valve for adjustment of the air/gas mixture.

Item 2066-03

In Stock

This burner’s angular shape allows it to be used while being tilted. Alcohol can be poured in by removing the cap. The burner is a useful staple for chemistry labs and classrooms.
• Glass with brass cap
• Capacity: 125 ml

Item 2066-11

In Stock

Use this metal cap with the Alcohol Burner (Item #2066-11).

Item 2066-13

In Stock

SPARE WICK AND HOLDER FOR ALCOHOL BURNER ANGULAR

Item 2066-16

In Stock

Burner Wing Tops, 7/16″

Item 2067-01

In Stock

BURNER WING TOPS 18MM (11/16″)

Item 2067-04

In Stock

These brushes are designed to easily and effectively clean test tubes. They have nylon bristles and are fan-shaped at one end on a twisted, galvanized iron wire. The brushes are a useful tool for chemistry lab cleanup.
• Brush size: 4″ (100 mm) L x 0.75″ (18 mm) W
• Overall length: 9″ (230 mm)

Item 2080-12

In Stock

These brushes are designed to easily and effectively clean test tubes. They have nylon bristles and are fan-shaped at one end on a twisted, galvanized iron wire. The brushes are a useful tool for chemistry lab cleanup.
• Brush size: 4″ (100 mm) L x 1.38″ (35 mm) W
• Overall length: 12″ (280 mm)

Item 2080-13

In Stock

Use this tool for scooping out small or large amounts of chemicals from bottles and other containers. The Scoopula is made of stainless steel. It has a semicircular cross section with one pointed end and one blunt end.
• Handle sold separately (2084-01H)
• Length about 6.5″ (165 mm)

Item 2084-01

In Stock

This stainless steel spatula is an essential tool for laboratories. The spatula is pressed into a bent, flat end, a raised center section, and a 0.81″ (20 mm) long scoop at the other end.
• 5.5″ (140 mm) L x 0.25″ (7 mm) W middle strip

Item 2084-04

In Stock

Made of stainless steel sheet. One end is a flat spatula and the other bent into a spoon form.
• 205 mm overall length
• Flat end: 34 mm L x 71 mm W

Item 2084-09

In Stock

This spatula is a great hand-held tool used in laboratories for lifting, flipping, or spreading small amounts of substances. It is made of a stainless rod, which is pressed into thin, flat double blades at both ends. One end is a flat strip, 0.31″ (8 mm) x 2.38″ (60 mm), and the other has a rounded angle end, about 0.31″ (8 mm) x 2.38″ (60 mm).
• Approx. 8″ (200 mm)

Item 2084-14

In Stock

SPATULA, PLASTIC (8in)

Item 2084-99

In Stock

This brass aspirator is for vacuum filtration and other low-vacuum applications. With 9 mm serrated inlet nozzles, it is designed to prevent flooding and turbulence. It is a helpful tool in laboratories.

Item 2089-02

In Stock

This brass aspirator is for vacuum filtration and other low-vacuum applications. With 9 mm serrated inlet nozzles, it is designed to prevent flooding and turbulence. It is a helpful tool in laboratories.
• Made of stainless steel

Item 2089-03

In Stock

Cork borers are often used in a chemistry or biology laboratory to cut a hole in a cork or rubber stopper to insert glass tubing. This nickel-plated brass handle and borer tube will punch a 0.25″ (7 mm) hole in corks and rubber stoppers. The steel punch is sold separately.

Item 2092-07

In Stock

Cork borers are often used in a chemistry or biology laboratory to cut a hole in a cork or rubber stopper to insert glass tubing. This nickel-plated brass handle and borer tube will punch a 0.56″ (15 mm) hole in corks and rubber stoppers. The steel punch is sold separately.

Item 2093-00

In Stock

Cork borers are often used in a chemistry or biology laboratory to cut a hole in a cork or rubber stopper to insert glass tubing. This nickel-plated brass handle and borer tube will punch a 0.19″ (5 mm) hole in corks and rubber stoppers. The steel punch is sold separately.

Item 2093-05

In Stock

Cork Borer Sharpener

Item 2095-00

In Stock

Wire Gauze Squares 4″

Item 2210-01

In Stock

Wire Gauze Squares 5″

Item 2210-02

In Stock

Wire Gauze Squares 6″

Item 2210-03

In Stock

Support and protect beakers or flasks during heating with our Wire Gauze Squares. The ceramic centers help evenly spread heat under the container and prevent direct contact with the flame. The gauze is made of galvanized woven wire with edges carefully turned over and includes a ceramic center.
• Frequently used in combination with our ring stand (Item #2056-series) or with our laboratory stand (Item #2050-02) and a support ring (Item #2038-series)
• 4″ (100 mm)

Item 2210-11

In Stock

Support and protect beakers or flasks during heating with our Wire Gauze Squares. The ceramic centers help evenly spread heat under the container and prevent direct contact with the flame. The gauze is made of galvanized woven wire with edges carefully turned over and includes a ceramic center.
• Frequently used in combination with our ring stand (Item #2056-series) or with our laboratory stand (Item #2050-02) and a support ring (Item #2038-series)
• 5″ (130 mm)

Item 2210-12

In Stock

Support and protect beakers or flasks during heating with our Wire Gauze Squares. The ceramic centers help evenly spread heat under the container and prevent direct contact with the flame. The gauze is made of galvanized woven wire with edges carefully turned over and includes a ceramic center.
• Frequently used in combination with our ring stand (Item #2056-series) or with our laboratory stand (Item #2050-02) and a support ring (Item #2038-series)
• 6″ (160 mm)

Item 2210-13

In Stock

Use these tongs for handling or manipulating hot crucibles and similar apparatuses. They provide a safe way of moving containers that are too hot to touch. The tongs are an indispensable tool for many chemistry labs.
• Corrugated tips for easy handling
• Riveted joint
• Finger openings are large enough for firm grip
• Made of Plated Steel
• 8″ (200 mm) L

Item 2020-01

In Stock

Use these tongs for handling or manipulating hot crucibles and similar apparatuses. They provide a safe way of moving containers that are too hot to touch. The tongs are an indispensable tool for many chemistry labs.
• Corrugated tips for easy handling
• Riveted joint
• Finger openings are large enough for firm grip
• Made of Plated Steel
• 6″ (150 mm) L

Item 2020-11

In Stock

Use these tongs for holding beakers from 50 ml up to 600 ml capacity. The jaws are covered with replaceable PVC tubing. These tongs are crucial for safely moving beakers in the lab.
• Made of plated steel
• 14.25″ (360 mm) L

Item 2024-01

In Stock

These specialty tongs are designed to hold liquid-filled beakers from 50 ml to 2000 ml capacity.
• Made of plated steel rod with plastic tubing covered jaws
• Finger grips are large enough for thumb and two fingers
• Approx. 10″ (250 mm) long

Item 2024-11

In Stock

Use this clamp for tubes from 6 mm to 31 mm in outer Dia. It is made of plated spring steel wire. The clamp has self-closing jaws with finger grips.
• Approx. 6″ (160 mm) L

Item 2030-01

In Stock

These are low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are indispensable tools for measuring out small amounts of liquid in chemistry labs. These one-piece pipettes are handy for both chemistry experiments and demonstrations.
• Sold in a pack of 500 • Capacity: 3 ml • Stem graduations: 0.50 ml. Length: 160 mm

Item 1085-33

In Stock

These are low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are indispensable tools for measuring out small amounts of liquid in chemistry labs. These one-piece pipettes are handy for both chemistry experiments and demonstrations.
• Sold in a pack of 500
• Capacity: 1 ml

Item 1085-11

In Stock