Laboratory / Glass & Plasticware
Products like our Caffeine Mugs and Labware Condensers can be found on this page. We understand the importance of using a quality apparatus when working with liquid in the lab.
Item 1085-34
Disposable Graduated Pipette, 3ml, pk/100
These are one-piece, low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are useful tools for measuring out small amounts of liquid in chemistry and biology labs.
• Sold in a pack of 100
• Capacity: 3 ml
Item 1085-34
In Stock
Item 1085-56
Disposable Graduated Pipette, 5ml, pk/100
These are one-piece, low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are useful tools for measuring out small amounts of liquid in chemistry and biology labs.
• Sold in a pack of 100
• Capacity: 5 ml
Item 1085-56
In Stock
Item 1085-66
Small Fast-Release Filler
This pipet filler, or pipet pump, can be used with glass or plastic pipets and employs a rotating thumb wheel to draw-up and despense precise amounts of liquid. The filler also features a rapid-release button for quick emptying. The small size is color-coded blue for easy recognition on the lab bench.
• 2 ml
Item 1085-66
In Stock
Item 1085-77
Medium Fast-Release Filler
This pipet filler, or pipet pump, can be used with glass or plastic pipets and employs a rotating thumb wheel to draw-up and despense precise amounts of liquid. The filler also features a rapid-release button for quick emptying. The medium size is color-coded green for easy recognition on the lab bench.
• 10 ml
Item 1085-77
In Stock
Item 1085-88
Large Fast-Release Filler
This pipet filler, or pipet pump, can be used with glass or plastic pipets and employs a rotating thumb wheel to draw-up and despense precise amounts of liquid. The filler also features a rapid-release button for quick emptying. The large size is color-coded red for easy recognition on the lab bench.
• 25 ml
Item 1085-88
In Stock
Item 2203-10
Plastic Measuring Cylinder 10 ml-1000 ml Set/7
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Set of 7 includes one of each (cylinders graduated up the following numbers): 10 ml, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml
• Does not have meniscus
• Autoclavable to 130°C
Item 2203-10
In Stock
Item 2206-00
Nesting Beakers, Polypropylene
This set of 8 polypropylene beakers is great for classroom use. It is a space saver as the beakers can be nested inside one another for storage. The beakers have pouring spouts and are made from sturdy, translucent plastic, which is resistant to most bases, acids and other solvents.
• Meniscus-free
• Autoclavable up to 100°C.
• Includes 1 beaker in each of the following sizes: 30 ml, 50 ml, 100 ml, 150 ml, 250 ml, 400 ml, 600 ml, and 1000 ml
Item 2206-00
In Stock
Item 1085-55
Disposable Graduated Pipette, 5 ml, Pk/500
These are one-piece, low-density polyethylene pipettes with suction bulbs and straight-tip graduated tubes. They are useful tools for measuring out small amounts of liquid in chemistry and biology labs.
• Sold in a pack of 500
• Capacity: 5 ml
Item 1085-55
In Stock
Item 5713-08
Graduated, Borosilicate Glass Beaker, 400 ml, Pk/8
These graduated beakers can be used for routine mixing, measuring, and boiling in the laboratory.
• Capacity: 400 ml
• Subdivision: 40 ml
• Microwave-safe
• Borosilicate glass
• Sold in a pack of 8
Item 5713-08
In Stock
Item 5713-09
Graduated, Borosilicate Glass Beaker, 500 ml, Pk/8
These graduated beakers can be used for routine mixing, measuring, and boiling in the laboratory.
• Capacity: 500 ml
• Microwave-safe
• Borosilicate glass
• Sold in a pack of 8
Item 5713-09
In Stock
Item 2205-05
Plastic Griffin Beaker 1000 ml, Pk/3
This beaker is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a broad base for stability.
• Comes in a pack of 3
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 1000 ml
Item 2205-05
In Stock
Item 2203-06
Plastic Measuring Cylinder 500 ml, Pk/4
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 4
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: approx. 650 ml
• Graduated up to 500 ml
Item 2203-06
In Stock
Item 2205-04
Plastic Griffin Beaker 500 ml, Pk/4
This beaker is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a broad base for stability.
• Comes in a pack of 4
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 500 ml
Item 2205-04
In Stock
Item 2203-08
Plastic Measuring Cylinder 2000 ml, Pk/4
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 4
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 2500 ml
• Graduated up to 2000 ml
Item 2203-08
In Stock
Item 2203-07
Plastic Measuring Cylinder 1000 ml, Pk/6
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 6
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 1300 ml
• Graduated up to 1000 ml
Item 2203-07
In Stock
Item 2205-03
Plastic Griffin Beaker 250 ml, Pk/6
This beaker is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a broad base for stability.
• Comes in a pack of 6
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 250 ml
Item 2205-03
In Stock
Plastic Tall Griffin Beaker with Handle 1000 ml, Pk/6
This beaker is a single piece, molded of translucent plastic, with raised graduations in liters and milliliters and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a flat, stable base for added stability.
• Sold in a pack of 6
• Autoclavable to 130°C
• Capacity: 1000 ml
Item 2207-02
In Stock
Plastic Tall Griffin Beaker with Handle 2000 ml, Pk/6
This beaker is a single piece, molded of translucent plastic, with raised graduations in liters and milliliters and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a flat, stable base for added stability.
• Sold in a pack of 6
• Autoclavable to 130°C
• Capacity: 2000 ml
Item 2207-03
In Stock
Plastic Tall Griffin Beaker with Handle 500 ml, Pk/24
This beaker is a single piece, molded of translucent plastic, with raised graduations in liters and milliliters and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a flat, stable base for added stability.
• Sold in a pack of 24
• Autoclavable to 130°C
• Capacity: 500 ml
Item 2207-01
In Stock
Item 2086-03
Watch Glasses, 3″, Pk/12
This circular Watch Glass is made of heavy walled plate glass with fired edges. It can be used in chemistry labs and classrooms as a surface to evaporate liquid, to hold solids while being weighed, as a cover for a beaker, or for heating a small amount of substance.
• Sold in a pack of 12
• 75mm (3″) Dia.
Item 2086-03
In Stock
Item 2086-05
Watch Glasses, 4″, Pk/12
This circular Watch Glass is made of heavy walled plate glass with fired edges. It can be used in chemistry labs and classrooms as a surface to evaporate liquid, to hold solids while being weighed, as a cover for a beaker, or for heating a small amount of substance.
• Sold in a pack of 12
• 100 mm (4″) Dia.
Item 2086-05
In Stock
Item 2203-03
Plastic Measuring Cylinder 50 ml, Pk/12
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 12
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: approx. 75 ml
• Graduated up to 50 ml
Item 2203-03
In Stock
Item 2203-04
Plastic Measuring Cylinder 100 ml, Pk/12
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 12
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: approx. 115 ml
• Graduated up to 100 ml
Item 2203-04
In Stock
Item 2203-05
Plastic Measuring Cylinder 250 ml, Pk/12
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 12
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: approx. 320 ml
• Graduated up to 250 ml
Item 2203-05
In Stock
Item 2205-01
Plastic Griffin Beaker 50 ml, Pk/12
This beaker is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a broad base for stability.
• Comes in a pack of 12
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 50 ml
Item 2205-01
In Stock
Item 2205-02
Plastic Griffin Beaker 100 ml, Pk/12
This beaker is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a broad base for stability.
• Comes in a pack of 12
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 100 ml
Item 2205-02
In Stock
Item 2205-00
Plastic Griffin Beaker 25 ml, Pk/12
This beaker is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The beaker has a broad base for stability.
• Comes in a pack of 12
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 25 ml
Item 2205-00
In Stock
Item 5713-07
Graduated, Borosilicate Glass Beaker, 250 ml, Pk/12
These graduated beakers can be used for routine mixing, measuring, and boiling in the laboratory.
• Capacity: 250 ml
• Subdivision: 25 ml
• Microwave-safe
• Borosilicate glass
• Sold in a pack of 12
Item 5713-07
In Stock
Item 5713-04
Graduated, Borosilicate Glass Beaker, 100 ml, Pk/12
These graduated beakers can be used for routine mixing, measuring, and boiling in the laboratory.
• Capacity: 100 ml
• Microwave-safe
• Borosilicate glass
• Sold in a pack of 12
Item 5713-04
In Stock
Item 2203-01
Plastic Measuring Cylinder 10 ml, Pk/24
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 24
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: 12 ml
• Graduated up to 10 ml
Item 2203-01
In Stock
Item 2203-02
Plastic Measuring Cylinder 25 ml, Pk/24
This Measuring Cylinder is a single piece, molded out of translucent plastic, with raised numerical graduations and a pouring spout. It is resistant to most common acids, bases, and solvents. The cylinder has a broad hexagonal base for stability.
• Comes in a pack of 24
• Does not have meniscus
• Autoclavable to 130°C
• Capacity: approx. 35 ml
• Graduated up to 25 ml
Item 2203-02
In Stock
Item 5540-30
Replacement Distillation Glass Flask, 500 ml
This is a replacement glass distillation flask only for the complete distillation set (Item #5540-20 or 5540-21). It does not include a stopper.
• Borosilicate glass
• 500 ml
Item 5540-30
In Stock
Item 5540-31
Replacement Distillation Glass Flask, 1500 ml
This is a replacement glass distillation flask only for the complete distillation set (Item #5540-20 or 5540-21). It does not include a stopper.
• Borosilicate glass
• 1500 ml
Item 5540-31
In Stock
Item 5540-20
Complete Distillation Apparatus Set, 500 ml
This glass distillation apparatus can be used for batch production of distilled water, manufacture of perfumes, concentrating acids, phenol, fractional distillation, determination of boiling point, etc. The set is packaged in custom cut-out soft foam block packaging and a sturdy box to keep it safe during delivery and storage.
Complete borosilicate glass/hardware set includes:
• Round bottom 500 ml flask
• 200 mm Graham type coil condenser with Stop Joint: 19/38
• 250 ml receiving flask
• 2 clamps
• Chemical-resistant, cake enamel finish, cast iron base 200 mm x 125mm (8″ x 5″) with a plated steel rod that can be unscrewed from the base for storage
Item 5540-20
In Stock
Item 5540-21
Complete Distillation Apparatus Set 1500 ml
This glass distillation apparatus can be used for batch production of distilled water, manufacture of perfumes, concentrating acids, phenol, fractional distillation, determination of boiling point, etc. The set is packaged in custom cut-out soft foam block packaging and a sturdy box to keep it safe during delivery and storage.
Complete borosilicate glass/hardware set includes:
• Round bottom 1500 ml flask
• 300 mm Graham type coil condenser with Stop Joint: 24/40
• 500 ml receiving flask)
• 2 clamps
• Chemical-resistant, cake enamel finish, cast iron base 200 mm x 125 mm (8″ x 5″) with a plated steel rod that can be unscrewed from the base for storage
Item 5540-21
In Stock
Item 5513-02
Burets Straight, PTFE Stopcock, Geissler Type 25 ml
This borosilicate glass buret is a volumetric tool used in chemistry and biology labs for drop-by-drop titrations. It has a straight bore with a PTFE stopcockfor exceptional accuracy and longevity.
• Capacity: 25 ml
• Subdivision: 0.10 ml
• Tolerance: +0.10 ml
Item 5513-02
In Stock
Item 5007-53
Retort 250ml
This transparent Retort can be used in the chemistry lab to distill (wet or dry) substances.
• 250 ml (8.5 oz)
Item 5007-53
In Stock
Item 5729-02
Reduction Adapter, 19/22 Socket, 24/40 Cone
This glass adapter is designed to connect different standard taper ground joint sizes. The upper, outer/socket joint is smaller than the lower inner/cone joint and can be used in a variety of glasswork set-ups.
Specifications
• Socket size: 19/22
• Cone size: 24/40
Item 5729-02
In Stock
Item 5729-03
Reduction Adapter, 19/22 Socket, 19/22 & 24/40 Cone
This glass adapter is used to connect different standard taper ground joint sizes. It has a lower inner/cone joint larger in size than the upper outer/socket joints. The apparatus has three necks: two parallel and one at 45°.
• Socket size: 19/22
• Cone size: 19/22 & 24/40
Item 5729-03
In Stock
Item 5726-00
Pear Shaped Flask, Single Neck
This pear-shaped flask are intended for evaporating solutions until dry after synthesis. The rounded V-shape of the bottom of the flask is ideal for scraping out the resulting solid materials.
Specifications:
• Joint: 14/20
• Capacity: 25 ml
Item 5726-00
In Stock
Item 5726-01
Pear Shaped Flask, Single Neck, 50 ml
This pear-shaped flask are intended for evaporating solutions until dry after synthesis. The rounded V-shape of the bottom of the flask is ideal for scraping out the resulting solid materials.
Specifications:
• Joint: 19/22
• Capacity: 50 ml
Item 5726-01
In Stock
Item 5734-02
Stopper (Closed Both Ends), 19/22 Cone
This stopper is made with ground glass and a hexagonal head for easy removal. For use in a wide variety of glass apparatuses.
Specifications:
Material: Borosilicate Glass
Cone: 14/20
Item 5734-02
In Stock
Item 5734-03
Stopper (Closed Both Ends) 24/40 Cone
This stopper is made with ground glass and a hexagonal head for easy removal. For use in a wide variety of glass apparatuses.
Specifications:
Material: Borosilicate Glass
Cone: 24/40
Item 5734-03
In Stock
Item 5725-00
Extractor of Soxhlet Apparatus, Top Joint 34/45
This extractor is designed with an outer top joint and inner bottom joint to serve as part of a Soxhlet Apparatus (along with a Soxhlet flask and a condenser) for the continuous extraction of lipids and other compounds from a solid into a suitable solvent.
• Top joint: 34/45, bottom joint: 24/40
Item 5725-00
In Stock
Item 5725-01
Extractor of Soxhlet Apparatus, Top Joint 45/50
This extractor is designed with an outer top joint and inner bottom joint to serve as part of a Soxhlet Apparatus (along with a Soxhlet flask and a condenser) for the continuous extraction of lipids and other compounds from a solid into a suitable solvent.
• Top joint: 45/50, bottom joint: 24/40
Item 5725-01
In Stock
Item 5725-02
Extractor of Soxhlet Apparatus, Top Joint 55/50
This extractor is designed with an outer top joint and inner bottom joint to serve as part of a Soxhlet Apparatus (along with a Soxhlet flask and a condenser) for the continuous extraction of lipids and other compounds from a solid into a suitable solvent.
• Top joint: 50/55, bottom joint: 24/40
Item 5725-02
In Stock
Item 5725-03
Extractor of Soxhlet Apparatus, Top Joint 71/60
This extractor is designed with an outer top joint and inner bottom joint to serve as part of a Soxhlet Apparatus (along with a Soxhlet flask and a condenser) for the continuous extraction of lipids and other compounds from a solid into a suitable solvent.
• Top joint: 71/60, bottom joint: 29/42
Item 5725-03
In Stock
Item 5725-04
Extractor of Soxhlet Apparatus, Top Joint 103/60
This extractor is designed with an outer top joint and inner bottom joint to serve as part of a Soxhlet Apparatus (along with a Soxhlet flask and a condenser) for the continuous extraction of lipids and other compounds from a solid into a suitable solvent.
• Top joint: 103/60, bottom joint: 29/42
Item 5725-04
In Stock
Item 5724-02
Soxhlet Flask, Flat Bottom, 300 ml, Joint 24/40
This flat-bottomed, round flask is designed with an outer top joint to fit as part of a Soxhlet Apparatus (Soxhlet Extractor and a condenser) for the continuous extraction of lipids and other compounds from a solid into a suitable solvent.
Specifications:
• Joint: 24/40
• Capacity: 300 ml
Item 5724-02
In Stock
Item 5724-03
Soxhlet Flask, Flat Bottom, 1000 ml, Joint 29/42
This flat-bottomed, round flask is designed with an outer top joint to fit as part of a Soxhlet Apparatus (Soxhlet Extractor and a condenser) for the continuous extraction of lipids and other compounds from a solid into a suitable solvent.
Specifications:
• Joint: 29/42
• Capacity: 1000 ml
Item 5724-03
In Stock
Item 5717-06C
Caffeine Mug with Handle, 400 ml
On one side of this clear beaker mug enameled in white is a caffeine molecule. On the other side, it has graduations up to 400 ml. When coffee or any other dark-colored drink is added, the molecular structure becomes very visible. The attached handle stays cool when holding hot liquids and this heat-resistant borosilicate glass is also microwave-safe.
• Capacity: 400 ml
• Graduated
Item 5717-06C
In Stock
Item 5722-03
Allihn Condenser, Jacket Length 400 mm, Joints 24/40
This Allihn condenser, with an insulated tube inside of a water jacket, can be used for distillation, reflux operations and extractions in chemistry labs. It allows for heating liquid, while avoiding complete evaporation to a dry container.
Specifications:
• Joints: 24/40
• Jacket: 400 mm L
Item 5722-03
In Stock
Item 5721-04
Beaker Mug with Handle, 500 ml
The handle makes an ordinary beaker easy to use. This mug is ideal for use in the office or at home. It works great with hot and cold drinks.
• Capacity: 500 ml
Item 5721-04
In Stock
Item 5717-02
Erlenmeyer Flask with Handle, 500 ml
The handle on this Erlynmyer flask offers ease and safety in the laboratory and classroom. These borosilicate glass flasks are heat-resistant and microwave-safe.
• Borosilicate glass
• Heat resistant
• Microwave-safe
• Graduated up to 500 ml
Item 5717-02
In Stock
Distillation Bent, 105°, 14/20 Joints, 100 mm W x 100 mm H
For use with distillation glassware, this adapter has inner joints at both ends.
Specifications:
• Joints: 14/20
• Joint Angle: 105°
• Approx. 100 mm W x 100 mm H
Item 5720-02
In Stock
Item 5714-01
Flask, Erlenmeyer, Narrow Neck 25Ml
This narrow-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures.
• Capacity: 25 ml (0.8 oz)
Item 5714-01
In Stock
Distillation Bent, 75°, 14/20 Joints, 55 mm W x 50 mm H
For use with distillation glassware, this adapter has inner joints at both ends.
Specifications:
• Joints: 14/20
• Joint Angle: 75°
• Approx. 50 mm W x 55 mm H
Item 5720-00
In Stock
Item 5720-01
Distillation Bent, 75°, 19/22 Joints
For use with distillation glassware, this adapter has inner joints at both ends.
Specifications:
• Joints: 19/22
• Joint Angle: 75°
• Approx. 50 mm W x 55 mm H
Item 5720-01
In Stock
Distillation Bent, 75°, 29/42 Joints, 140 mm W x 130 mm H
For use with distillation glassware, this adapter has inner joints at both ends.
Specifications:
• Joints: 29/42
• Joint Angle: 75°
• Approx. 130 mm W x 140 mm H
Item 5720-05
In Stock
Item 5734-01
Stopper (Closed Both Ends), 14/20 Cone
This stopper is made with ground glass and a hexagonal head for easy removal. For use in a wide variety of glass apparatuses.
Specifications:
Material: Borosilicate Glass
Cone: 19/22
Item 5734-01
In Stock
Item 5718-01
Distilling Flask with Side Arm, 125 ml
This flask can be used for all types of distillation work.
• Capacity: 125 ml
• Side Arm Placement: 77 mm below top of neck
• Side Arm Angle: 75°
Item 5718-01
In Stock
Item 5718-03
Distilling Flask with Side Arm, 500 ml
This flask can be used for all types of distillation work.
• Capacity: 500 ml
• Side Arm Placement: 77 mm below top of neck
• Side Arm Angle: 75°
Item 5718-03
In Stock
Item 5505-10
Burets Mohr Borosilicate Glass 100 ml
This borosilicate glass Mohr Buret is a volumetric tool used in chemistry and biology labs for drop-by-drop titrations. Simple to repair and replace its individual parts, this buret is an economical and practical choice for educational purposes.
• Tooled tip fits 16 mm inner Dia. flexible rubber tubing
• Calibrated at 20°C as per tolerances
• Buret includes pinch cock, rubber tubing, and glass jet.
• Capacity: 100 ml
Item 5505-10
In Stock
Item 5515-02
Burets, Plastic, 25 ml
This buret has a clear acrylic body and leak-proof stopcock with a self-lubricating PTFE stop. It is individually calibrated for maximum accuracy.
• Graduated at 0.1 ml
• Resistent to dilute acids and bases within pH range of 1-14
• Not for use with hydrofluoric acie or amonium hydroxide
• Capacity: 25 ml
Item 5515-02
In Stock
Item 5515-05
Burets, Plastic, 50 ml
This buret has a clear acrylic body and leak-proof stopcock with a self-lubricating PTFE stop. It is individually calibrated for maximum accuracy.
• Graduated at 0.1 ml
• Resistent to dilute acids and bases within pH range of 1-14
• Not for use with hydrofluoric acie or amonium hydroxide
• Capacity: 50 ml
Item 5515-05
In Stock
Item 5515-10
Burets, Plastic, 100 ml
This buret has a clear acrylic body and leak-proof stopcock with a self-lubricating PTFE stop. It is individually calibrated for maximum accuracy.
• Graduated at 0.1 ml
• Resistent to dilute acids and bases within pH range of 1-14
• Not for use with hydrofluoric acie or amonium hydroxide
• Capacity: 100 ml
Item 5515-10
In Stock
Item 5729-01
Reduction Adapter, 14/20 Socket, 19/22 Cone
This glass adapter is designed to connect different standard taper ground joint sizes. The upper, outer/socket joint is smaller than the lower inner/cone joint and can be used in a variety of glasswork set-ups.
Specifications
• Socket size: 14/20
• Cone size: 19/22
Item 5729-01
In Stock
Item 5718-00
Distilling Flask with Side Arm, 50 ml
This flask can be used for all types of distillation work.
• Capacity: 50 ml
• Side Arm Placement: 77 mm below top of neck
• Side Arm Angle: 75°
Item 5718-00
In Stock
Item 7001-00
Wash Bottle LDPE WM, 500 ml, Unitary
This translucent, one-piece squeeze bottle is easy to use and durable. It is perfect for use in chemistry laboratories for washing and rinsing glassware and other supplies.
• Material: Low-Density Polyethylene
• Capacity: 500 ml (16.9 oz)
Item 7001-00
In Stock
Item 5727-01
Still Head with Thermometer Socket, 19/22
This still head is used in distillation assemblies for connecting flasks to a condenser. The upper socket is designed to accept a thermometer either via cone/screwthread adapter or thermometer pocket.
Specifications:
• Cone size to fit flask:19/22
• Cone size to fit condenser: 19/22
• Socket size: 14/20
Item 5727-01
In Stock
Item 5732-08
Round-Bottom Flask, 100 ml Cap, 14/20 Joint
This spherical flask can be used in a variety of glass set-ups. The round shape evenly distributes stress and heat across its surface and makes it more fracture-resistant.
Specifications:
• Capacity: 100 ml
• Outer flask joint: 14/20
• Borosilicate glass
Item 5732-08
In Stock
Item 5732-09
Round Bottom Flask, 100 Ml Cap, 19/22 Joint
This spherical flask can be used in a variety of glass set-ups. The round shape evenly distributes stress and heat across its surface and makes it more fracture-resistant.
Specifications:
• Capacity: 100 ml
• Outer flask joint: 19/22
• Borosilicate glass
Item 5732-09
In Stock
Item 5732-12
Round-Bottom Flask, 250 ml Cap, 19/22 Joint
This spherical flask can be used in a variety of glass set-ups. The round shape evenly distributes stress and heat across its surface and makes it more fracture-resistant.
Specifications:
• Capacity: 250 ml
• Outer flask joint: 19/22
• Borosilicate glass
Item 5732-12
In Stock
Item 5732-16
Round-Bottom Flask, 500 ml Cap, 24/40 Joint
This spherical flask can be used in a variety of glass set-ups. The round shape evenly distributes stress and heat across its surface and makes it more fracture-resistant.
Specifications:
• Capacity: 500 ml
• Outer flask joint: 24/40
• Borosilicate glass
Item 5732-16
In Stock
Item 5732-19
Round-Bottom Flask, 1000ml Cap, 24/40 Joint
This spherical flask can be used in a variety of glass set-ups. The round shape evenly distributes stress and heat across its surface and makes it more fracture-resistant.
Specifications:
• Capacity: 1000 ml
• Outer flask joint: 24/40
• Borosilicate glass
Item 5732-19
In Stock
Item 5910-00
Volumetric Flask with Glass Stopper, 50 ml
This laboratory glass flask is made of borosilicate and is calibrated to its precise volume. This flask is ideal for precise dilutions and preparations of standard solutions.
• Borosilicate glass
• Capacity: 50 ml (1.7 oz)
Item 5910-00
In Stock
Item 5910-25
Volumetric Flask with Glass Stopper, 250 ml
This laboratory glass flask is made of borosilicate and is calibrated to its precise volume. This flask is ideal for precise dilutions and preparations of standard solutions.
• Borosilicate glass
• Capacity: 250 ml (8.5 oz)
Item 5910-25
In Stock
Item 5910-50
Volumetric Flask with Glass Stopper, 500 ml
This laboratory glass flask is made of borosilicate and is calibrated to its precise volume. This flask is ideal for precise dilutions and preparations of standard solutions.
• Capacity: 500 ml (16.9 oz)
Item 5910-50
In Stock
Item 5911-09
Beaker, Bomex, Glass, 5000 ml
This heat-resistant, quality glassware, produced by Bomex, will meet any any number of laboratory needs.
• 5000 ml (169 oz)
• Microwave-safe
• Borosilicate glass
Item 5911-09
In Stock
Item 5721-00
Beaker Mug with Handle, 600 ml
The handle makes an ordinary beaker incredibly easy to use. This versatile product is ideal in the office or at home for hot and cold drinks. These borosilicate, heat-resistant beakers have standard graduations up to 500 ml (total volume of 600 ml).
• Microwave-safe
Item 5721-00
In Stock
Item 5721-02
Beaker Mug with Handle, 400 ml
The handle makes an ordinary beaker incredibly easy to use. It is ideal for the office or at home for hot and cold drinks. These borosilicate glass mugs are resistant to heat and safe for the microwave.
• Capacity: 400 ml
Item 5721-02
In Stock
Item 5722-02
Allihn Condenser, Jacket Length 300 mm, Joints 24/40
This Allihn condenser, with an insulated tube inside of a water jacket, can be used for distillation, reflux operations and extractions in chemistry labs. It allows for heating liquid, while avoiding complete evaporation to a dry container.
Specifications:
• Joints: 24/40
• Jacket: 300 mm L
Item 5722-02
In Stock
Item 5727-00
Still Head with Thermometer Socket, 14/20
This still head is used in distillation assemblies for connecting flasks to a condenser. The upper socket is designed to accept a thermometer either via cone/screwthread adapter or thermometer pocket.
Specifications:
• Cone size to fit flask: 14/20
• Cone size to fit condenser: 14/20
• Socket size: 14/20
Item 5727-00
In Stock
Flask, Erlenmeyer, Narrow Neck, Conical, Graduated, 125 ml
This narrow-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures.
• Capacity: 170 ml
• Graduated up to 125 ml
Item 5714-03
In Stock
Flask, Erlenmeyer, Narrow Neck, Conical, Graduated, 250 ml
This narrow-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures.
• Capacity: 360 ml
• Graduated up to 250 ml
Item 5714-04
In Stock
Item 5714-05
Flask, Erlenmeyer, Narrow Neck, Conical, Graduated, 500ml
This narrow-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures.
• Graduated up to 500 ml
Item 5714-05
In Stock
Item 5714-06
Flask, Erlenmeyer, Narrow Neck, Conical, Graduated, 1000Ml
This narrow-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures.
• Graduated up to 1000 ml
Item 5714-06
In Stock
Item 5714-21
Flask, Erlenmeyer , Wide Neck, Conical, Graduated, 25 Ml
This wide-necked Erlenmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures requiring easier access through the wider neck.
• Graduated up to 25 ml
Item 5714-21
In Stock
Item 5714-22
Flask, Erlenmeyer , Wide Neck, Conical, Graduated, 50 Ml
This wide-necked Erlenmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures requiring easier access through the wider neck.
• Graduated up to 50 ml
Item 5714-22
In Stock
Item 5714-25
Flask, Erlenmeyer, Wide Neck, Conical, Graduated, 500ml
This wide-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures requiring easier access through the wider neck.
• Graduated up to 500 ml
Item 5714-25
In Stock
Item 5714-26
Flask, Erlenmeyer, Wide Neck, Conical, Graduated, 1000ml
This wide-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures requiring easier access through the wider neck.
• Graduated up to 1000 ml
Item 5714-26
In Stock
Item 5716-01
Filtering Flask with Side Arm, 250 ml
This flask is used for receiving a filtering liquid and is made of heavy-walled glass. Its side tube can be connected to a suction pump.
• Borosilicate glass
• Capacity: approx. 280 ml
• Graduated up to 250 ml
Item 5716-01
In Stock
Item 5716-02
Filtering Flask with Side Arm, 500 ml
This flask is used for receiving a filtering liquid and is made of heavy-walled glass. Its side tube can be connected to a suction pump.
• Borosilicate glass
• Graduated up to 500 ml
Item 5716-02
In Stock
Item 5717-01
Erlenmeyer Flask with Handle, 250 ml
The handle on this Erlynmyer flask offers ease and safety in the laboratory and classroom. These borosilicate glass flasks are heat-resistant and microwave-safe.
• Borosilicate glass
• Heat resistant
• Microwave-safe
• Graduated up to 250 ml
Item 5717-01
In Stock
Item 5718-02
Distilling Flask with Side Arm, 250 ml
This flask can be used for all types of distillation work.
• Capacity: 250 ml
• Side Arm Placement: 77 mm below top of neck
• Side Arm Angle: 75°
Item 5718-02
In Stock
Item 5719-03
Graduated, Borosilicate Glass Beaker, 50 ml
This standard glass beaker can be used for routine mixing, measuring, and boiling in biology and chemistry labs.
• Borosilicate glass
• Capacity: approx. 60 ml
• Graduated up to 50 ml
• Microwave-safe
Item 5719-03
In Stock
Item 5719-04
Graduated, Borosilicate Glass Beaker, 100 ml
This standard glass beaker can be used for routine mixing, measuring, and boiling in biology and chemistry labs.
• Borosilicate glass
• Graduated up to 100 ml
• Microwave-safe
Item 5719-04
In Stock
Item 5719-11
Graduated, Borosilicate Glass Beaker, 1000 ml
This standard glass beaker can be used for routine mixing, measuring, and boiling in biology and chemistry labs.
• Borosilicate glass
• Graduated up to 1000 ml
• Microwave-safe
Item 5719-11
In Stock
Item 5719-12
Graduated, Borosilicate Glass Beaker, 2000 ml
This standard glass beaker can be used for routine mixing, measuring, and boiling in biology and chemistry labs.
• Borosilicate glass
• Graduated up to 2000 ml
• Microwave-safe
Item 5719-12
In Stock
75° Distillation Bent, 24/40 Joints, 140 mm W X 130 mm H
For use with distillation glassware, this adapter has inner joints at both ends.
Specifications:
• Joints: 24/40
• Joint Angle: 75°
• Approx. 130 mm W x 140 mm H
Item 5720-03
In Stock
Distillation Bent, 105°, 19/22 Joint, 130 mm W x 100 mm H
For use with distillation glassware, this adapter has an outer joint at one end and an inner joint at the other end and a side arm on the outside of the bend for connection to a vacuum source.
Specifications:
• Joints: 19/22
• Joint Angle: 105°
• Approx. 104 mm W x 104 mm H
Item 5720-04
In Stock
Item 5593-05
Tubes Gas Measuring, 50 Ml
This gas measuring tube is used for measuring gases and is closed at the zero end of the tube.
• Graduated
• 50 ml
Item 5593-05
In Stock
Item 5593-10
Tubes Gas Measuring, 100Ml
This gas measuring tube is used for measuring gases and is closed at the zero end of the tube.
• Graduated
• 100 ml
Item 5593-10
In Stock
Item 5611-03
Funnel, Short Stem, 45mm
This transparent, short-stem funnel has numerous uses in chemistry and biology labs.
• Dimensions: 45 mm (1.8″) Dia.
Item 5611-03
In Stock
Item 5714-02
Flask, Erlenmeyer, Narrow Neck 50Ml
This narrow-necked Erlynmyer flask can be used in chemistry and biology labs for spill-free swirling, titrations, growing microbial cultures and multiple other procedures.
• Capacity: 50 ml (1.7 oz)
Item 5714-02
In Stock
Item 5585-20
Tubes, Test, With Sidearm 20X150Mm
Use this glass tubes for microfiltration and other applications.
• 20 mm (0.8″) Dia. X 150 mm (5.9″) L.
Item 5585-20
In Stock
Item 5585-25
Tubes, Test, with Sidearm, 1″ x 8″
Use these glass tubes for microfiltration and other applications.
• Borosilicate Glass
• Dimensions: 25 mm (1″) L x 203 mm (8″) Dia.
Item 5585-25
In Stock
Item 5572-05
Tube, Thistle
The thistle tube can serve as a funnel for adding a small amount of liquid with precision and agility.
• Made of borosilicate glass
• Approx. dimensions: 177 mm (7″) L, top dia. 18 mm (0.7″), outer stem dia. 5 mm (0.2″)
Item 5572-05
In Stock
Item 5554-12
U-Shaped Drying Tubes, 100x13mm
U-Shaped Drying Tubes can be used for drying gases with desiccants such as granular calcium chloride, magnesium perchloratem etc.
• 100×13 mm
Item 5554-12
In Stock
Item 5554-14
U-Shaped Drying Tubes, 150x13mm
U-Shaped Drying Tubes can be used for drying gases with desiccants such as granular calcium chloride, magnesium perchloratem etc.
• 150×13 mm
Item 5554-14
In Stock
Item 5554-22
U-Shaped Drying Tubes with Side Arms
U-Shaped Drying Tube with Side Arms can be used for drying gases with desiccants such as granular calcium chloride, magnesium perchloratem etc.
Item 5554-22
In Stock
Item 5565-03
Measuring Cylinders, Metric Scale Capacity 10Ml
Use these measuring cylinders in general laboratory procedures. They have round bases, spouts, and break-resistant collars.
• Capacity: 10 ml
• Subdivision: 0.1 ml
• Tolerance: +0.1 ml
Item 5565-03
In Stock
Item 5565-05
Measuring Cylinders, Metric Scale, Capacity: 25
Use these measuring cylinders in general laboratory procedures. They have round bases, spouts, and break-resistant collars.
• Capacity: 25 ml
• Subdivision: 0.5 ml
• Tolerance: +0.5 ml
Item 5565-05
In Stock
Item 5565-07
Measuring Cylinders, Metric Scale Capacity 50Ml
Use these measuring cylinders in general laboratory procedures. They have round bases, spouts, and break-resistant collars.
• Capacity: 50 ml
• Subdivision: 1.0 ml
• Tolerance: +1.0 ml
Item 5565-07
In Stock
Item 5571-20
Thiele Melting Point Tubes 25 mm x 165 mm
Use this tube to determine substances’ melting points. The arm allows convection currents to form during heating, heating the liquid inside relatively evenly. Putting in a small sample of a substance and a thermometer allows the melting point to be determined in a simple experiment.
• 25 mm (1″) outer Dia. x 165 mm (6.5″) L
• 100 mm (3.9″) W at widest point of arm
Item 5571-20
In Stock
Item 5543-60
Condenser, Liebig Type, 300 mm, Full Length 24/40 Joints
This general purpose condenser is for distillations and extractions. The condenser has a sealed inner tube and is suitably tooled for leak-proof functioning for leak-proof functioning. Can be used with other sized joints.
• Borosilicate glass
• Jacket: 300 mm L
• Joint: 24/40
Item 5543-90
In Stock
Item 5544-30
Condenser, Graham Coil Type, 300 mm
This condenser is primarily used for distillation requiring high surface area per unit length. It is comprised of a leak-free jacket sealed to the inner tube, which is coiled throughout. The inlet ends on these condensers are sloped to avoid trapping condensation.
• Borosilicate glass
• 300 ml
• Joint: 24/40
Item 5544-30
In Stock
Item 5544-40
Condenser Graham Coil Type, 400 mm, 24/40
This condenser is primarily used for distillation requiring high surface area per unit length. It is comprised of a leak-free jacket sealed to the inner tube, which is coiled throughout. The inlet ends on these condensers are sloped to avoid trapping condensation.
• Borosilicate glass
• 400 ml
• Joint: 24/40
Item 5544-40
In Stock
Item 5544-60
Condensers Graham Coil Type, 600 mm, 24/40
This condenser is primarily used for distillation requiring high surface area per unit length. It is comprised of a leak-free jacket sealed to the inner tube, which is coiled throughout. The inlet ends on these condensers are sloped to avoid trapping condensation.
• Borosilicate glass
• 600 ml
• Joint: 24/40
Item 5544-60
In Stock
Item 5550-06
Separatory Funnel, Pear Shaped, 50 ml
This pear-shaped funnel is used to separate layers of immiscible liquids or for dropping liquids. It has a glass stopcock and is made of borosilicate glass. The funnel has an interchangeable glass stopper with a plain stem.
• Borosilicate glass
• Capacity: 60 ml
• Includes glass stopcock
Item 5550-06
In Stock
Item 5550-12
Separatory Funnel, Pear Shaped, 125 ml
This pear-shaped funnel is used to separate layers of immiscible liquids or for dropping liquids. It has a glass stopcock and is made of borosilicate glass. The funnel has an interchangeable glass stopper with a plain stem.
• Borosilicate glass
• Capacity: 125 ml
• Includes glass stopcock
Item 5550-12
In Stock
Item 5550-25
Separatory Funnels, Pear Shaped, 250 ml
This pear-shaped funnel is used to separate layers of immiscible liquids or for dropping liquids. It has a glass stopcock and is made of borosilicate glass. The funnel has an interchangeable glass stopper with a plain stem.
• Borosilicate glass
• Capacity: 250 ml
• Includes glass stopcock
Item 5550-25
In Stock
Item 5550-35
Separatory Funnels, Pear Shape, Ptfe Stop Cock, 500Ml
This pear-shaped funnel is used to separate layers of immiscible liquids or for dropping liquids. It has a glass stopcock and is made of borosilicate glass. The funnel has an interchangeable glass stopper with a plain stem.
• Borosilicate glass
• Capacity: 500 ml
• Includes PTFE glass stopcock
Item 5550-35
In Stock
Item 5550-50
Item 5551-06
Separatory Funnels, Globe Shape, 50 ml
This glass separatory funnel is for use in liquid-liquid extractions. It allows users to separate (partition) the components of a mixture into two immiscible solvent phases of different densities.
• Borocilicate glass
• Capacity: 60 ml
Item 5551-06
In Stock
Item 5551-12
Separatory Funnels, Globe Shape, 125 ml
This glass separatory funnel is for use in liquid-liquid extractions. It allows users to separate (partition) the components of a mixture into two immiscible solvent phases of different densities.
• Borocilicate glass
• Capacity: 125 ml
Item 5551-12
In Stock
Item 5551-25
Separatory Funnels, Globe Shape, 250 ml
This glass separatory funnel is for use in liquid-liquid extractions. It allows users to separate (partition) the components of a mixture into two immiscible solvent phases of different densities.
• Borocilicate glass
• Capacity: 250 ml
Item 5551-25
In Stock
Item 5554-04
Drying Tubes 150 mm x 20 mm
These glass tubes are have tooled ends for stoppers and can be used for drying gases with desiccants such as granular calcium chloride, magnesium perchloratem etc. They are straight with one bulb.
• Borosilicate glass
• Dimensions: 150 mm L x 20 mm outer dia.
Item 5554-04
In Stock
Item 5513-10
Burets Straight, PTFE Stopcock, Geissler Type 100 ml
This borosilicate glass buret is a volumetric tool used in chemistry and biology labs for drop-by-drop titrations. It has a straight bore with a PTFE stopcockfor exceptional accuracy and longevity.
• Capacity: 100 ml
• Subdivision: 0.20 ml
• Tolerance: +0.20 ml
Item 5513-10
In Stock
Item 5525-15
Centrifuge Tubes, Conical Bottom, Graduated 15Ml
These centrifuge tubes have a conical bottom and can be used for chemistry lab steps requiring centrifugation to separate particles within a solution.
Temperature Range: Up to 27 C (80.6 F)
Graduated: 0.20 ml
Volume: 15 ml
Item 5525-15
In Stock
Item 5530-02
Item 5530-04
Condenser Adapter, 180 mm, Body Inner Dia. 25 mm
This condenser adapter is used in a distillation set up and designed to cool and condense vapors.
• Borosilicate glass
• Joint angle: 105°
• Joint: 24/40
• Delivery end outer Dia.: 10 mm
• Body inner Dia.: 25 mm
• Approx. dimension: 180 mm L
• Stopper #12
Item 5530-04
In Stock
Item 5530-06
Condenser Adapter, 200 mm, Body Inner Dia. 30 mm
This condenser adapter is used in a distillation set up and designed to cool and condense vapors.
• Borosilicate glass
• Joint angle: 105°
• Joint: 24/40′
• Delivery end outer Dia.: 10 mm
• Body inner Dia.: 30 mm
• Approx. dimension: 200 mm L
• Stopper #14
Item 5530-06
In Stock
Item 5530-08
Condenser Adapter, 180 mm, 24/40 Joint
This condenser adapter is used in a distillation set up and designed to cool and condense vapors.
• Borosilicate glass
• Joint angle: 105°
• Joint: 24/40′
• Delivery end outer Dia.: 10 mm
Item 5530-08
In Stock
Item 5532-01
Connecting Tubes, Sidearm Type Recovery Head
This connecting tube can be used in distillation and other glass set ups in chemistry and biology laboratories.
• Borosilicate glass
• Joint angle: 75°
• Joints: 19/22 taper
Item 5532-01
In Stock
Item 5534-01
Connecting Tubes, Claisen Type, 19/22
This claisen connecting tube serves as an adaptor to merge two parallel tubes and can be used as part of the glassware set up for a number of organic chemistry laboratory procedures. Ground glass joints allow pieces to be assembled, leak-free, without stoppers.
• Borosiliate Glass
• Joint: 19/22
Item 5534-01
In Stock
Item 5536-01
Distillation Connecting Tube Bent
This bent glass connecting tube can be used as a connector in a distillation set up, as well as in other glassware set-ups in the chemistry and biology lab.
• Borosilicate glass
• Joint: 19/22
Item 5536-01
In Stock
Item 5536-11
Distillation Connecting Tube, Straight
This straight glass connecting tube can be used as a connector in a distillation set-up, as well as in other glassware set-ups in the chemistry and biology lab.
• Borosilicate glass
Item 5536-11
In Stock
Item 5540-00
Distillation Apparatus, 500 ml
This general purpose glass set up can be used to distill water, phenol, etc..
Apparatus includes:
• 500 ml borosilicate flasks (round and flat bottom)
• Graham type condenser: 200 mm with 19/38 joint
• Interchangeable stopper
Item 5540-00
In Stock
Item 5540-11
Distillation Apparatus, 1500 ml
This general purpose glass set up can be used to distill water, phenol, etc..
Apparatus includes:
• 1500 ml borosilicate flasks (round and flat bottom)
• Graham type condenser: 300 mm with 24/40 joint
• Interchangeable stopper
Item 5540-11
In Stock
Item 5543-20
Condenser, Liebig Type, 200 mm
This general purpose condenser is for distillations and extractions. The condenser has a sealed inner tube and is suitably tooled for leak-proof functioning.
• Borosilicate glass
• Jacket: 200 mm L
Item 5543-20
In Stock
Item 5543-30
Condenser, Liebig Type, 300 mm
This general purpose condenser is for distillations and extractions. The condenser has a sealed inner tube and is suitably tooled for leak-proof functioning.
• Borosilicate glass
• Jacket: 300 mm L
Item 5543-30
In Stock
Item 5543-40
Condenser, Liebig Type, 400 mm
This general purpose condenser is for distillations and extractions. The condenser has a sealed inner tube and is suitably tooled for leak-proof functioning.
• Borosilicate glass
• Jacket: 400 mm L
Item 5543-40
In Stock